Electronic geosynthetics comprehensive strength machine

Сфера применения:

It is mainly used for testing and analyzing mechanical properties of metal materials and non-metal materials such as tensile, compression, bending, etc., with three closed-loop control methods of stress and strain displacement, it can calculate the maximum force, tensile strength, bending strength, compressive strength, elastic modulus, fracture elongation, yield strength and other parameters. Test and provide data according to GB and ISO, JS, ASTM, DIN and other international standards.

Соответствие критериям:

GB/T16491-2022,GB/T15788-2017,GB/ T13763-2010, ASTM D4632M-a15,GB/ T2191, FZ/T01010.

CJ/T452-2014, GB18173.1-2012 and JC/T2112.

Технические параметры:

Maximum test force 10KN

Test machine accuracy level 0.5

Test force measurement range 0.4%-100%6FS ungraded throughout

The relative error of the test force indication value is within ±0.5%

Test force resolution The maximum test force of 1/+500000 the entire resolution is unchanged

Deformation measurement range 0.2%-100%FS

The relative error of the deformation indication value is within ±0.5%

Deformation resolution 1/+500000 of the maximum deformation

Large deformation measuring range 10-800mm

The relative error of large deformation indication is within +0.5%

Large deformation resolution 0.008mm

The relative error of the displacement indication is within +0.5% of the indication

Displacement resolution 0.05um

Force control rate adjustment range 0.01-5%FS/S

The relative error of the force control rate is within +1% of the set value

Deformation rate adjustment range 0.02-5%FS/S

The relative error of deformation control rate is within +1% of the set value

Beam speed adjustment range 0.001-500mm/min

Relative error of beam speed

When the speed {<}0.01mm/min, within +1.0% of the set value

When the speed is 20.01mm/min, the set value is within ±0.2%

Constant force, constant deformation, constant displacement control range 0.5%- 100%FS

Constant force, constant deformation, constant displacement control accuracy

If the set value {<}10%FS is within +1% of the set value

When the set value is ≥10%FS, it is within +0.1% of the set value

Effective drawing space （with fixture）850mm

Effective test width 400mm

Host dimensions （L x W x H）700x510x1940（mm）

Power supply 220V±10%, 750W

The weight of the machine is about 290kg