DescriptionThe STD-RCF 2 Rolling Bearing Tribometer is designed for running friction loss tests on
WhatsApp +86 13816217984
Электронная почта :info@qinsun-lab.com
The STD-RCF 2 Rolling Bearing Tribometer is designed for running friction loss tests on rolling element bearings, including large and heavy axial load taper roller bearings. Two alternative test assemblies are available, one for testing smaller bearings at loads up to 10 kN and one for testing large bearings at loads up to 40 kN. The maximum speed is 7.500 rpm.
| Contact Configurations: | Taper Roller Bearing | |
| Angular Contact Bearing | ||
| Thrust Ball Bearing | ||
| Roller Thrust Bearing | ||
| Rotational Speed: | 100 to 7.500 rpm | |
| Motor: | 4.0 kW ac @ 1.500 rpm | |
| 50% overload available for 30 seconds | ||
| Heated Block Power: | 550 W | |
| Temperature Sensor: | k-type thermocouple | |
| Vibration Sensor: | piezo-electric type with adjustable threshold sensitivity and cut-off time | |
| Interface: | Serial Link Interface Module | |
| Software: | COMPEND 2000 | |
Controlled Parameters | ||
| Rotational Speed | ||
| Температура | ||
| Загрузка | ||
| Продолжительность тестирования | ||
Recorded Parameters | ||
| Rotational Speed | ||
| Friction Torque | ||
| Temperatures | ||
| Number of Revolutions | ||
| Продолжительность тестирования | ||
| Vibration Sensor Output | ||
RCF 2/10 Low Load Range Test Assembly | ||
| Friction Torque: | 10 Nm In-line Torque Transducer | |
| Load Reaction: | Spindle Bearings | |
| Spindle Bearing Load: | 10.000 N @ 3.000 rpm | |
| 4.000 N @ 7.500 rpm | ||
| Maximum Test Bearing O/D: | 60 mm | |
| Maximum Temperature: | 150°C | |
RCF 2/40 High Load Range Test Assembly | ||
| Friction Torque: | Torque Arm and Load Cell | |
| Load Reaction: | Bearing Housing | |
| Spindle Bearing Load: | 40.000 N | |
| Maximum Test Bearing O/D: | 180 mm | |
| Maximum Temperature: | 150°C | |
Services | ||
| Electricity: | 380/415 V, three phase, | |
| 50/60 Hz, with neutral & earth 7.5 kW | ||
| Clean, dry air: | 4 cfm at 8 bar (120 psi) | |
Installation | ||
| Floor-standing Machine: | 900 x 600 x 2000 mm high, 250 kg | |
| Bench-mounting cabinet: | 530 x 420 x 300 mm high, 20 kg | |
| Packing Specifications: | 2.2 m3, GW 600 kg, NW 450 kg | |
Вышеуказанный контент предназначен для ссылки и общения только между инсайдерами отрасли и не гарантирует его точности или полноты. Согласно соответствующим законам и нормативным актам и правилам этого веб-сайта, подразделения или лица, приобретающие связанные с ними предметы, должны получить действительную квалификацию и условия квалификации.
Телефон компании
+86-21-6420 0566
Время работы
С понедельника по пятницу
Мобильный телефон:
13816217984
Электронная почта:
info@qinsun-lab.com
