Femoral Stem Fatigue Performance Testing Machine

Стандарты

• YY/T 0809.4 (China): Specifies fatigue testing protocols for femoral stems in partial/total hip arthroplasty.
• ISO 7206-4 (International): Defines methodologies for evaluating the fatigue strength of femoral stem-bone cement interfaces.
• ASTM F2580: Additional compliance for impact resistance testing of modular femoral necks.
• Adaptive Protocols: Customizable for emerging standards in additive-manufactured implant evaluation.

Преимущества продукции

1. Electromagnetic Precision: M-Series actuator delivers ±0.05% force accuracy with 0.001N resolution.
2. 5 Million Cycle Endurance: Proven capability to complete ISO 7206-4’s 5×10⁶-cycle fatigue test without drift.
3. R=0.1 Load Control: Advanced closed-loop system maintains stress ratios during dynamic loading.
4. Real-Time Fracture Detection: AI-powered acoustic emission monitoring identifies micro-cracks at sub-millisecond intervals.
5. Intuitive Workflow: 21.5” capacitive touchscreen with gesture control and pre-loaded SOPs for 15+ implant geometries.
6. Modular Environmental Chambers: Quick-swap pods for simulated physiological (-20°C to +50°C) and corrosive environment testing.

Особенности продукции

• Electromagnetic Actuator: 2,300 N peak force capacity with programmable load ratios (R=0.1–10).
• Triaxial Loading System: Simultaneous axial/torsional/shear loading (50 Nm max torque).
• Dynamic Load Control: 1–30 Hz frequency range with programmable waveforms (sine, square, random, custom).
• Thermal-Mechanical Chamber: ±0.3°C temperature stability with integrated humidity control (10–95% RH).
• High-Speed Imaging Ready: Syncs with external cameras for full-field strain mapping (DIC optional upgrade).
• Safety First: Triple-redundant emergency stop, overload clutches, and laser-based specimen breakage detection.

Технические параметры

Standard Accessories

1. Femoral Stem Test Fixture Kit:
   • Self-centering collet system (12/14 mm taper compatibility)
   • Laser-aligned loading anvils with diamond-like carbon (DLC) coating
2. Thermal-Mechanical Chamber:
   • 25L capacity with rapid cooling/heating (15°C/min)
   • 316L stainless steel interior with HEPA filtration
3. TestMaster Ultimate Software:
   • Automated fatigue life prediction (S-N/ε-N curve generation)
   • 21 CFR Part 11-compliant audit trail with blockchain timestamping
   • Remote monitoring via dedicated iOS/Android app
4. Operator Kit:
   • Calibrated torque wrench set (0.5–50 Nm)
   • Specimen alignment gauges (ISO 7206-4 compliant)
5. Calibration Bundle:
   • NIST-traceable force calibration weights
   • Temperature/humidity verification probe
6. Safety Kit:
   • Laser safety curtains
   • Acoustic enclosure with 30 dB noise reduction