Automotive wire abrasion testing machine

Применимые критерии:

ISO 6722, OC/T730, JIS C 3046, JASO D 611.SAEJ1128-2005, JBT 8139 TBT 1484.1-2001 Part1.EN50305, EN50306 and other standards

Основные параметры:

1, the test stroke is greater than 10mm, the scraper displacement :20mm+1mm, the scraping length :15.5±1mm

2, movement frequency :50——60 cycles/minute （touch screen set）

3, counter :6 bits （touch screen setting）

4. Test times :6 times （touch screen setting）

The minimum distance between the test points and the test point and the sample end is greater than 10mm, and the sample rotation Angle is 90°

6, sample length: about 750mm sample firmly fixed on a steel anvil

7, weight: basic load :4N, plus :5N, 6N, 7N, 8N, 9N, 10N, 11N（applied to the scraper on the weight）

8, with function: when the needle wears through the insulation and conductor contact, the equipment will stop

9, the scraping needle movement according to the "U" shape, to avoid the sample unilateral effort caused by the phenomenon of unilateral easy to be scratched through,

10, the diameter of the scraper :0.45mm+0.01mm（spring wire）

11, the test temperature monitoring function: the test environment temperature is not within the range of 23℃+1℃， the testing machine can not start or run automatically stop.

12, control system: servo motor, touch screen +PLC（imitation Ruitu imported model）

13. Transmission mechanism: imported double slide rail type

14, equipped with plexiglass test samples to prevent environmental temperature fluctuations can be affected by the test.