Rubber / Foam / Sponge Permanent Compression Tester / ASTM D3574 / ISO 1856 - Qinsun
Специализированные производители контрольно - измерительных приборов
Национальная & quot; горячая линия & quot;:+86 021-64208466
Продукты

Rubber / Foam / Sponge Permanent Compression Tester / ASTM D3574 / ISO 1856

Detailed Product DescriptionTemperature Control Range:50℃-300℃Internal Size:35*35*35cmDimension

WhatsApp +86 13816217984

Электронная почта :info@qinsun-lab.com

Содержание

Презентация продукции

Permanent Compression Tester is for Rubber Static Compression Test

Permanent compression of the degree of distortion tester to take the standard test pieces, sandwiched between the flat panel, the screw rotation, compression to a certain rate, and then into a certain temperature of the oven (optional), after the specified time to remove, remove Test pieces, cooling for 30 minutes, measuring the thickness, into the formula for compression distortion.

Clamp specimens between metal plates by tighten nuts to apply a certain pressure for a required period,

place the device with specimen in a oven with required temperature for a required period, specimens were taken out and cooled for 30 minutes,

the final thickness is measured for calculating the recovery performance of specimen.

Приложение

It is mainly used for baking, drying, heat treatment and thermal processing of items, agricultural production, scientific research, medical and health units, and laboratory experiments. It is suitable for drying, baking, baking, drying, baking, It is used for wax melting, sterilization, drying and disinfection, and can also be used for general constant temperature tests.

Test Standard

ASTM D 3574 Test D;

ASTM D 3574 Aging Test K;

ISO 1856

Технические параметры

Temperature control range50℃-300℃
Internal size35*35*35cm
Размер84*57*67См
Volume136L
Internal Materialstainless steel
Власть3000W
Диапазон времени1-9999 minutes
Temperature fluctuation±1℃
точность регулирования температуры1℃
Temperature uniformity≤1℃ (the temperature deviation of different areas in the box under the empty box state)
Test piecesrubber φ28.68. 12.7mm (D) foam plastic 50 × 50 × 25mm
Volume20 × 12 × 10cm
Вес11kg

Product features

1. The shell adopts electrostatic spraying process, and the paint film is firm and beautiful.

2. 2. On the door roommate observation window, you can observe the heating condition of the work room at any time.

3. 3. Microcomputer intelligent PID control, dual-screen high-brightness digital display, clear and beautiful display, accurate and stable temperature control. With timing (0-9999min).

4. 4. The hot air circulation system is composed of a fan that can continuously operate at high temperature and is sealed, and the work chamber is evenly empty.

5. 5. The inner tank is made of galvanized sheet or stainless steel sheet, and the semi-circular arc four corners design is more convenient to use and clean.

6. 6. The door of the box is sealed with silicone strips for good sealing effect.

Вышеуказанный контент предназначен для ссылки и общения только между инсайдерами отрасли и не гарантирует его точности или полноты. Согласно соответствующим законам и нормативным актам и правилам этого веб-сайта, подразделения или лица, приобретающие связанные с ними предметы, должны получить действительную квалификацию и условия квалификации.


Онлайн сообщение

Контактные данные

Телефон компании

+86-21-6420 0566

Время работы

С понедельника по пятницу

Мобильный телефон:

13816217984

Электронная почта:

info@qinsun-lab.com

QR-код